Flower decoration on hand. DIY bridesmaids
Choosing a wedding for several bridesmaids is a western tradition, but it has taken root in many countries. Marrying girls want to highlight their friends and show a special attitude towards them. As a rule, for this they sew dresses of one shade, select the appropriate accessories. But sewing a festive outfit is a costly affair; moreover, not all girls will want to appear at the celebration in the same clothes. Then you can create bracelets for bridesmaids. These original products will not only highlight the girls among the guests of the wedding, but also emphasize the style of the bride and groom.
How to make bracelets for bridesmaids from satin ribbons
When decorating bracelets for bridesmaids, the atlas is often used. Ribbons made of such material look gentle, romantic and touching. The future spouse can make beautiful accessories with satin bows, use ribbons to create a fabric flower or as a background for a floral composition with living plants. The bracelet with a satin ribbon decorated with shining beads will look stylish on the wrist of the bridesmaid. This option is perfect for any wedding style and requires very little cash investment.
Necessary materials
- glass or pearl beads (the required hole diameter is 2-3 mm);
- satin ribbon with a width of one and a half centimeters, a length of sixty centimeters;
- lighter;
- scissors.
Stages of creation
DIY handmade fabric bracelet
Bracelets for bridesmaids must be consistent with the style of the holiday. If the newlyweds are organizing a classic event or a romantic wedding, floral accessories will suit the girls. Fresh flowers are expensive, so the future spouse, who creates jewelry, can use fabric plants. It is good if the flower chosen by the bride will be combined with the elements of her bouquet. See below a master class on making a traditional airy rose flower.
Necessary materials
- Cardboard.
- Pencil (or compass).
- Scissors.
- Glue. The workshop uses professional adhesive equipment that requires some experience. It can be replaced with ordinary high-quality glue-moment. Perfectly "Crystal Moment", which does not leave yellow spots on the fabric.
- Threads in tone of material.
- Four types of fabric shades suitable for the theme of the celebration: chiffon, tulle, silk, cotton fabric (or other dense material).
- Needle.
- Satin ribbon.
Stages of creation
Wedding Bracelet Ideas for Bridesmaids
When deciding how to make bracelets for bridesmaids, the future spouse should take into account the style of the event, the type of her own festive decoration, the flower arrangement in the bouquet, as well as the tastes of her friends. Each handmade accessory is not only a piece of jewelry worn by girls during the wedding, but also a commemorative bag. If friends like the bracelet created by the bride, they will be happy to keep it as a memory of the day of the wedding, and the modest and simple accessories girlfriends can wear in everyday life.
Of beads and rhinestones
Stylish bracelets with beads are suitable for any type of event, depending on the color scheme that the future spouse will choose. For weddings in the Provence style, lilac and purple details are suitable, blue beads or pearl elements can be used for a sea celebration, a white and yellow palette will decorate a lemon celebration. With rhinestones, the bride-needlewoman needs to be careful - the abundance of shining pebbles will perfectly emphasize the official style of the wedding, and at an informal event it will look out of place.
Made of polymer clay
If the future spouse has experience in creating jewelry or a variety of figures made of polymer clay, making bracelets for bridesmaids using this material can be an excellent solution. The newlywed will succeed in fully expressing his imagination by inventing accessories for the chosen theme of the event. The hero of the occasion can mold with the help of polymer clay berries, flowers, delicate butterflies, animals and even nonexistent plants for a fabulous wedding style.
From feathers and braid
Feathers are a favorite decoration of girls, because they look airy, stylish and rich. Bracelets for girlfriends with these elements and braid are perfect for retro weddings, events in the style of gangsters. In the upcoming season, themed boho festivals (bohemian chic) \u200b\u200bwill be especially popular, where a variety of feathers of all colors and sizes will become quite appropriate. Feathers on the braid decorated with ornaments can emphasize the event in the Indian style: bracelets will look interesting and unusual not on the wrists, but, for example, on the forearms of the bridesmaids.
Of fresh and artificial flowers
Traditionally, when creating accessories for bridesmaids, natural or artificial flowers are used. Certain types of plants can emphasize the image of any girl, and the richness of the color scheme will allow you to find a harmonious combination with the decor of the event.
When making jewelry for girlfriends with fresh flowers, keep in mind that they will need more money than artificial flower bracelets. In addition, their stems will require recharge from a special tape tape. Real or not, the buds will be a wonderful decoration for the bridesmaids.
From decorative twigs and berries
At any time of the year bracelets for bridesmaids will look great, decorated with decorative or dry twigs with berries. These elements of decor are suitable for autumn, winter weddings, when prices for fresh flowers are noticeably rising. They will also decorate a rustic-style event. Berries and small twigs look cozy, cute, romantic, create a special mood.
Video - a lesson on creating color bracelets
Almost every needlewoman engaged in sewing at home could have shreds of light thin fabrics at home. These materials will come in handy if you want to make stylish, original wedding bracelets for your girlfriends. To create a beautiful accessory, you need to cut the petals, glue them to the base (lace or satin ribbon), and then decorate with an elegant brooch, bead beads or other decorative elements to taste. A detailed workshop in the video below will help you make stylish bracelets that will be a wonderful decoration for your bridesmaids.
The choice for a wedding celebration of several bridesmaids is a western tradition, but it has taken root in many countries. For girlfriends, clothes of one shade are sewn, appropriate accessories are selected. But sewing a festive outfit is a costly affair; moreover, not all girls will want to appear at the celebration in identical dresses. Then you can have a flower on your hand, which will act as a bracelet for bridesmaids, and make it your own hands as easy as shelling pears.
How to make a flower on hand with your own hands for a celebration of satin ribbons
When decorating bracelets for bridesmaids, satin material is often used. Ribbons from such a fabric look very gentle, romantic and touching. The future spouse can make beautiful accessories with satin bows, use ribbons to create fabric flowers or as a background for a floral composition with living plants. A stylish bracelet with a satin ribbon will look stylish on the wrist of the bridesmaid. This option is ideal for a wedding celebration in any style and will require very little cash infusion.
Prepare the necessary materials and tools for work:
- glass or pearl beads (the required hole diameter is two to three millimeters);
- satin ribbon with a width of one and a half centimeters and a length of about sixty centimeters;
- lighter;
- sharp scissors.
After preparing everything you need, you can start making bracelets for bridesmaids.
When buying your favorite beads, check if a satin ribbon passes through their holes. If the hole size is less than two millimeters, there is a risk that the bride will not be able to pass through her fabric.
After picking up the beads of a suitable size, cut the edge of the ribbon at an angle. This is necessary so that in the future it would be easier and faster to string beads.
Burn the cut edge of the satin ribbon with a lighter or matches, so it will not blossom in the future. This should be done very carefully so as not to burn all the material.
After finishing the pretreatment of the fabric, put on your first bead, pushing it to the opposite edge of the satin ribbon. The free end should have a total length of about twenty centimeters in order to subsequently form a beautiful bow.
Fasten the strung first bead with knots on both sides so that the glass piece does not slip. Each next bead should also be fixed using two nodes.
Having finished putting on the glass elements on a satin ribbon, carefully process the unfired edge of the material, as in the first step. Set the iron to a low temperature and gently iron the edges of your ribbon. A beautiful bracelet for the celebration is ready!
We make a bracelet on a hand from fabric flowers with our own hands: a detailed description
Bracelets for bridesmaids must be consistent with the style of celebration. If the newlyweds are organizing a classic event or a romantic wedding, floral accessories will suit the girls. Fresh flowers are expensive, so the future spouse, who creates jewelry, can use fabric plants.
We suggest you learn how to create a delicate rose bud with your own hands. Prepare the necessary material for work:
- Cardboard.
- Pencil (or compass).
- Scissors.
- Super glue.
- Threads in tone of the main material.
- Four types of fabric shades suitable for the theme of the celebration: chiffon, tulle, silk, cotton fabric (or other dense material).
- Needle.
- Satin ribbon.
Start the process of making a flower in your hand in a step-by-step lesson with your own hands. Using a compass or a simple pencil, draw a circle on the cardboard that will become the basis for your future flower. Cut the pattern with scissors. Put the blank on the base fabric, cut ten round shreds of each material. Useful advice: if you want to speed up the process, fold the fabric piece ten times, attach the template to it with a pin and cut immediately all the necessary number of blanks for flower petals.
To form a petal, fold a circle of matter in half, the resulting semicircle - again in half. Closer to the corner, fasten the leaf with a few stitches, a thread of a suitable shade.
Create a beautiful flower by gluing all the petals to a cardboard blank. For a more natural looking plant, alternate between different types of materials. Glue the petals so that their edges intersect slightly.
Attach the resulting rose to a satin ribbon.
Video on the topic of the article
We offer to watch a selection of videos.
Content
When working on bracelets for bridesmaids, it is necessary to consider the style and color scheme of the wedding itself. It is important that the bracelets are in harmony with the outfits of the girlfriends and the bride. Ready-made metal bracelets, satin ribbons, beautiful elastic bands and much more are often used as the basis for bracelets. You can decorate the base with flowers, beads, beads and other elements.
Lacy
Lace bracelets look very gentle and elegant.
For work you will need:
- Satin ribbon (25 mm wide);
- White lace;
- Brooch;
- Elastic band (15 mm wide);
- Half beads on a thread;
- Flowers;
- Thermal gun;
- Scissors;
- Needle with thread;
- Pins
Manufacturing instruction
First, we need to cut the same lengths of lace and satin ribbons, about 30 cm each.
Now we pin one tape on the back of the lace (you can sweep with a needle and thread). We turn our design in half, face inward, we chop off the edges with a pin.
Then the edge is securely sewn on a sewing machine.
Now we take the second segment of a white satin ribbon, we impose it over the first, basting with pins or threads. The ends of the second ribbon are slightly bent inwards, fastened with pins.
We sew two ribbons and lace with machine seams laid on both sides of the ribbon. The ends are not stitched.
The basis is ready, now we proceed to the manufacture of decor. From a satin ribbon we make a bow, fasten it with a thread. In the center of the bow we sew a brooch.
We are preparing to use decorative elements: half beads, flowers. We cut 18 cm of thread with half beads, fold it with a figure of eight, fasten it in the center with white thread.
Sew a bow with a beautiful brooch to the front side of the lace base, approximately in the center of the segment. We fasten the stitches only to lace, without piercing the double layer of satin ribbon under the bottom. Next to the bow we glue a figure of eight from half beads. On top of the figure eight we attach a large flower, glue small flowers side by side, forming a beautiful composition.
In order for the bracelet to sit securely on your wrist, you must pass a regular elastic band between the two layers of ribbons. We measure the elastic band of the bride’s bridesmaid’s long wrist circumference. We pierce one edge of the elastic band onto the pin, thread the pin into the unstitched joint between the ribbons, draw it around the entire circumference of the bracelet. We securely stitch the free edges of the elastic with a white thread.
We distribute the elastic band over the entire bracelet, we sew in a secret seam to the slot where the elastic was slid.
The lace bracelet is ready!
From satin ribbons
Such a bracelet will become a beautiful decoration for the bridesmaids and will remain with them for a long memory of a beautiful event.
To work, you will need:
- Satin fabric for flowers (pastel colors);
- Round pattern;
- Paper;
- A simple pencil;
- 50 cm satin ribbon (2-2.5 cm wide);
- Hot glue;
- Lighter;
- Various accessories for decoration (buttons, rhinestones, brooches);
- Scissors;
- Needle with thread.
Manufacturing instruction
We start the work with making flowers from satin. To do this, draw a circle with a diameter of 7 cm on a piece of paper. In our case, the template was a woman with tape. Paper template cut out with scissors.
The resulting blank is applied to satin fabric, circle the circles with a pencil, which are then cut out. If you use circles of different diameters, you will get more magnificent flowers for a bracelet such as peonies.
On fabric circles we make scissors cuts, as shown in the photo.
We circle each circle along the contour with a lighter. This will protect the fabric from tightening, give the petals a rounded shape and unevenness at the edges.
Glue several blanks together, one on one, arranging the petals in a checkerboard pattern.
Glue the finished flowers on the tape with hot glue. The ends of the tape are also scorched over an open fire so that the braid does not open. In the center of each flower we attach a decorative button, rhinestone or brooch.
This bracelet is made of satin colors.
Glamelia
Such a bracelet with great glamor from foamiran is perfect for a bridesmaid, for a graduate, or decorates a woman’s pen at another special occasion.
For work you will need:
- Foamiran of three primary colors (coral, white and burgundy);
- Hemispherical frame made of foam, newspapers, wire or other material;
- Acrylic oil paints;
- Quick fix glue;
- Mother of pearl beads;
- White teip tape.
Manufacturing instruction
On a paper template, cut out the petals of white, coral and burgundy color. We apply each petal to a preheated iron. When the workpiece begins to deform, we transfer it to the mold with a leaf and carefully press it, stretching the petal to the edges and top. We perform such an operation with each blank.
Using a sponge and oil paint, we tint the bard petals, giving them a deeper color. If your material has enough saturated color, then you can skip this step. The tinted blanks are left to dry for several days.
If there is no polystyrene hemisphere, which is used as the basis for glamelia, then it can be woven from newspaper tubes. To do this, we cross 3 newspaper tubes and braid them with two connecting tubes.
We start one tube from above, another from below. To make the base smooth and neat, you can braid some round object.
We weave 8 rows and, tucking all the ends of the tubes, glue them to PVA.
While the base dries, prepare the middle for the flower. We wrap the bead wire 7 cm long with a white typ tape. Fasten the beads to the tape with quick-fix glue. Stamens are ready.
Glue three white petals around three stamens. We lap the petals, overlapping the seams.
We fix the flower on a newspaper frame.
The next row is also formed of three petals, placing them in a checkerboard pattern.
After two more white rows, we begin to make coral. We also fasten them in a checkerboard pattern so that the flower turns out to be truly magnificent.
Now we pass through the newspaper frame on each side two satin ribbons for attaching the bracelet to the hand.
The last to fix a number of burgundy and a number of coral petals.
We glue small white petals, worked on the iron, and a circle of white foamiran with a diameter of 6 cm on the inside. So the inside will look much nicer and neater.
Post Views: 479
Date: 2015-05-22 | Views: 13867
A similar female bracelet made of fresh flowers is also called a “flower corsage” and is often used at ceremonial events - weddings, graduations, cocktail parties. And at the wedding they can be worn by both the bride and the bridesmaids or guests.
When choosing plants for a bracelet, pay attention to flowers with flattened inflorescences - chrysanthemums, chamomiles, gerberas. They will be the best choice for young girls on prom night. Half-opened roses are also great for our purpose. They are classics in floristry.
Orchids (for example, cymbidiums or phalaenopsis) can retain their freshness for a long time without water, and therefore they are popular as flowers for such bracelets. So, decide on the colors that will be the basis of the composition and which will complement them. Our main flowers will be three pink cymbidium, and three white lilies complementing them.
An important element of the bouquet is greenery. She will emphasize luxurious flowers. As an addition, you can use other flowers with small inflorescences (for example, solidago, small-flowered chrysanthemums or carnations), any leaves, succulents and even feathers. Do not abuse the additional elements - the bracelet can become very massive and interfere during the ceremony.
Making a flower bracelet
We cut three pieces of wire about 10 cm long and leave the peduncle about 3 cm in cymbidiums. We pass one wire into each flower right under the inflorescence, as shown in the photo.
Bend the threaded wire in half.
We wrap the tape and the flower pedicle with tape. Tighten the tape during the winding. If she broke off, it doesn’t matter. Start wrapping again from the cliff.
Add lilies. We apply them to the main flower and tie a teip tape with it. We should get 3 cymbidium flowers, each of which is strung on a wire and wrapped in teyp tape with lilies.
We lay the cymbidium flowers one under the other and fasten them together with the help of the same tape.
The creation of the flower arrangement for the bracelet is completed. Now you need to make a fixture, with which the bouquet will be held on a bracelet. We take a piece of wire 15 cm long and wrap it with an overlap with a teyp tape. Then we make “scissors” - such as shown in the photograph. At the top should be two loops, and at the bottom two ends of the wire, folded together.
We cut off a wide pink satin ribbon with a length of about 90 cm. We pass it through the holes of our “scissors”.
The next step is to cut off a piece of 30 cm from a thin satin ribbon and fasten it to the front side of the bouquet using hot glue from a heat gun. Hot glue should not damage the flowers, as it is actually applied to the green teip tape.
From the back of the bouquet we apply our “scissors”. We put a thin satin ribbon attached to the front side of the composition into the holes of the “scissors” and tie a tight knot on the “back” of the bouquet. Now it is securely attached to our mount. We do not touch the wide satin ribbon yet.
It is time to attach the floral arrangement to the elastic strap so that you can wear it on your hand. In our example, the elastic strap is equipped with special metal tabs, with the help of which the fastening takes place.
It is necessary to attach the bouquet to these tabs and pinch it with metal tongues in two places - at the bottom at the bottom of the bouquet and pass the second pair of tongues into our “scissors”. In other floristic straps, bouquets may be attached in a different way.
We left unused wide satin ribbon, which we threaded through the "scissors". It is quite long, about 90 cm. This should be enough to wrap the bouquet, closing the place where flowers are attached to the bracelet, and tie a beautiful bow on the front side.
Now we place the flower bracelet in a plastic bag and store in the refrigerator until the event. Ideally, such a composition on hand is done on the day of the event or at night on the eve of the ceremony.
If you liked the article and don’t want to miss new useful materials, I invite you to join a group of regular readers and subscribe to the site updates.
Next topic: