Dracaena

She came to us from wet tropics ... It is called shrub, but can grow up to 20 meters in height ... All these words about the dragery. In the plant, the grades are characterized by a large variety, whereas at home are growing about 3-4 species. This is not some kind of bonsai, but a bright representative of the flora. When the representative of the type of dusseren care at home, as in the photo, is carried out according to all the rules, it pleases its mistress with an abundant, lush crown. We will talk about competent leaving today.

DRATSEN Flower: How to care for home?

The most popular species are considered:

1. Flower drazes fragrant. Even in the ordinary room will grow without problems.
2. Marginate drazes with red border on the leaves and a long enough stem.
3. Drazen State Department. Characterized by oval motley leaves.

If the space of the room allows, other types are possible. It is enough to put in a pot of the pot in a pot and put in a room with a high ceiling. The same type of marginat easily reaches a height of three meters.

Beautifully blossom to joy to the owners will be the kind of sander. Sometimes it is planted in one container of 2-3 copies. This allows you to create a very unusual weave of the stems in an exotic style.

DRATSEN SADERA

However, only healthy plants will be able to delight beauty. If you do not have information, how to put a flower, its leaves will begin to deform and dry out, insects and pests will appear. It is unlikely that such a copy will be able to please you with beauty. With some content factors, it can accept, but some are quite unacceptable.

So, when growing a plant, it is necessary to comply with such requirements: optimal temperature, comfortable lighting, regular irrigation modes and timely feeding for drazes, lack of drafts. Consider each of these factors in more detail.

The easiest way to create an optimal temperature regime for evergreen plants. In summer, the required temperature in +20 - 22 degrees is created naturally. In the end, if there is air conditioning in your home or office, create the right mode will not be difficult. When the flowering of drazes occurs in the summer, it is even brought to a balcony or an open loggia contour.

In general, the drazes of the tree retains its viability at a temperature range from 5 to 27 degrees. In winter, this indicator should be equal to 15-17 degrees.

Planting drazes

How to plant a dragerate if she does not like straight sun rays and at the same time is a heat-loving plant? Never put it on the south window. By building a separate stand at a distance of 120-150 cm from the window, on a hot sunny day you can protect the leaflets from burns. It is not difficult to notice them. They look like dark points covering an external and inner surface.

As the drazes blooms, it is possible and not to see if it is not created for the plant the necessary microclimate of wet tropics. This is one of the most important tasks of the gardener. There are three main methods of the so-called "moistureater": traditional watering, accommodation next to the plant of special evaporators, timely spraying of leaves.

The higher the air temperature, the more care it is necessary to have a plant. To increase the humidity in the residential room, you can put a wet cloth on the battery, put aquarium, set the pallet with moss sphagnum and pebbles. These measures will provide a gradual and continuous evaporation of moisture.

Separate species simply cannot develop normally without spraying with water. So that the "water procedures" were as useful as possible and efficient, the driver must be altered.

It is embezzlened when the upper layer of the soil becomes dry in the hot season. Using a special coal filter, skip water water through it. There is no such possibility. Alternative to the coal filter will be charcoal, which is simply rushed into the water in the process of settling.

Fertilizer for drasa can be used universal. The main thing is that it does not contain fluoride. In the summer period, the drazes need a weekly feeding, in the winter the procedure can be reduced to once a month.

Despite the drazes, bloom passes abundantly with constant access to fresh air, strong drafts may be destructive for the plant. That is why ventilation should be regular, but without excesses.

Sometimes, with bad lighting, the plant begins to resemble bonsai. It is strongly pulled out or, on the contrary, it grows poorly. Sometimes barrel is broken, characteristic scars appear from the leaves, which were previously sold. Regular change of leaves is a natural process for this plant. However, you can do as follows. Cut the macushus of drasens together with a barrel of 12-15 cm long, and put the plant itself in a dark place. Do not water it until new leaves begin to appear. The flower will be significantly updated, new branching will appear. By the way, in the type of drazes, the transplant can be carried out using a cut part. Sections that remained open, mandatory are poured with garden borants or crowded coal.

The transplant of adult plants in the new Vase is considered one of the most responsible stages of content. The rules for the selection of the most suitable capacity are complicated. So, if the plant has a length of 35-40 cm, it is necessary to transplant the dragerate into a pot of about 15 cm in diameter.

Young plants transplant every year, mostly in the spring. The transplant involves the purchase of soil, as for palm. The drainage layer is mandatory. It is necessary to water the plant after transplanting, the use of stimulating the growth of the feeding is quite justified.

All you need to know about flowering drazes

Some gardeners do not know how this plant can look during flowering. First of all, this is due to improper conditions of content. It is pleasant to smell siny drazes. The flower rod develops quite a long time - sometimes you have to wait for 10-12 years. The final result will be sure to please.

The most convenient methods of breeding drazes

Want to get even more plants? Without problems - you can use the following ways:

1. Check up the top process.
2. Modify the plant parts of the trunk.
3. Diggers.

The most efficient time of the year for the reproduction of Drazen is spring. At this time, everything around wakes up, the growth of plants is also activated. The easiest and fastest way is the shilling. Take the top of the trunk (even with leaves) and cut it with a very sharp knife. Approximate cutlength length - 10 centimeters.

Please note that a properly performed cut plant plays an important role.

Ripped edges, torn bark pieces - the first step towards the rapid death of the plant. A third of the leaves is cleaned, it significantly accelerates rooting. It can also be carried out in different ways:

1. In water. A prerequisite is heated to room temperature, absolutely clean water. It should be changed more often, by periodically adding activated coal.
2. In solid materials. For example, sand, hydrogel and perlite. The substrate used and the air should have a temperature of +20 degrees. Spray the cuttings regularly, perform ventilating in the morning and in the evening for 15-20 minutes.
3. In inert substrates. We are talking about the reproduction of drazes with stalks. After the living stem was divided into cuttings with a length of 5-15 centimeters, it is also cut along the sheet scar. Steel cuttings can be rooted with a horizontal and vertical way.

The key to successful rooting will be the optimum temperature (not lower than +20) and the cuttings content in the greenhouse.

Conclusion

1. Clean the dust from the leaves regularly.
2. Take a plant on fresh air.
3. Carry out the upper layer of soil. This is a positive effect affects growth.
4. Provide additional lighting in the winter period.
5. Spray on hot days.