Parrot from a syringe for moonshine. How to make a moonshine parrot with your own hands? Execution options at home

The distillation of the moonshine is simple, but a fairly responsible process, because the task of the Vinorur is to make not only high-quality, but also safe to drink alcohol. In the process of distillation, an important role is played by timely and proper cutting off the "tailings" and "heads", which allows you to obtain only ethyl alcohol. To correctly cut off "tails" and "heads", you need to pay attention to such a mogon parameter as its fortress. Experienced vinones are able to determine this characteristic by the smell of distillate, but the newcomers will come to the rescue as a parrot. The parrot for the moonshine apparatus is your own hands - this is a successful idea, since the manufacture of this small, but important for distillation of the moonshine of the device, does not require high labor costs.

What it is?

Parrot for moonshine is a small device that automatically and continuously controls the rate of raw alcohol strength generated at the output. The main component of the homemade parrot is filled with alcohol in which the area is located. The tube that fails distillate from the coil, connects to the container at its lower part. From above the tube is attached, which takes distillate into a clean capacity. Why is such equipment called a parrot? The answer is simple - it resembles the silhouette of this bird.

Parrot for moonshine

The parrot for the moonshine works with their own hands according to such a scheme: distillate through the introductory tube enters the measuring cylinder through the refrigerator. After the distillate, it passes to the end of the body of the device, it shifts, penetrates a funnel, and then through the tap tube it flows into a clean container for a distillate collection.

Many devices are substituted to the distillator as receiving funnels. There are also parrots that are connected to the coil using connecting tubes. If desired, the parrot for moonshine can be equipped with a thermometer, which will allow to track not only the distillate fortress, but also its temperature.

Parrot as auxiliary equipment has such advantages as simplicity in application and manufacture. Such a device is suitable for all models of distillers, including distillation columns. The acquisition of the parrot requires insignificant costs. The flaws of the parrot include the error, fluctuating in the range of 2-3%. Also, the parrot cannot be applied to running water, which can also be attributed to its minuses.

How to do?

How to make a parrot with their own hands:

• take a steel or copper flask, but glass containers will also be suitable, which will play the role of the flask;
• the flask should be installed, and there should be several millimeters of free space between it and the walls of the flasks;
• the height of the flask must be 2 millimeters more than the height of the range;
• the area of \u200b\u200bthe area is located below the level of the drain, and the entry tube funnel is higher than the top of the device.

Important: The diameter of the parrot tubes made of copper, steel or glass should be equal to the diameter of the coil tube.

It can be concluded that the manufacture of the parrot takes at least forces and time, and most important - effort!

Causes of Mother Understanding Masters called Parrot continuous Control Device FortressUsing it, it is possible to determine the strength of the liquid, which gives real-time.

Why do you need it? First of all, to determine the moment when you already need to "cut off the tails" and get distillate into separate dishes.

"Tails" - very useful for the moonshrix liquid. Although it is no longer suitable due to the small fortress, but added to, will help get in the future more strong moonshine.

The design is called a parrot, probably for some similarity with a bird having a keyboard. Consider the device of the parrot and find out whether it is possible to build a high-quality parrot for the moonshine with your own hands and which material for this should be chosen.

Briefly a parrot device that you can see in this picture can be described as follows:

• Two communicating vertical tubes acting on the principle of connecting vessels.
• The first of the tubes (thin) brings from the bottom to the main vessel distillate coming from the refrigerator.
• Basically, the vessel (it is in the form of a larger diameter cylinder) is assembled distillate and gradually accumulates. In this cylinder floats the range, constantly reporting the fortress of the filling vessel of the alcohol-containing fluid.
• At the top of the main cylinder is a tube through which ready product flows into a substituted jar.

Pros and cons device

The parrot for the moonshine makes it possible to continuously control the fortress of the moonshine, which comes out of the moonshine. A parrot is installed behind the refrigerator, alcohol-containing liquid is assembled into it.

List the main advantages This design:

1. The parrot allows you to monitor the distillate fortress to cut off the "tails" in time.
2. Easy use and self-making.
3. Connecting to the moonshine device of any design, including.
4. Relative cheapness.

Reference. The last jets of Mogon, the fortress of which is below 40 °, have increased content, so undesirable in the moonshine. Their selection in separate dishes already at the first (especially - the second) distillation ensures the production of a clean product.

disadvantages:

1. Approximate measurement of the fortress. Missing with real degrees - within 3 °.
2. Distillate flow. The areaometer cannot instantly respond to the changing strength, so readings with a delay in time, and therefore dedustibility may already be lower than the aerometer shows at the moment.
3. The generally accepted temperature of measuring the fortress of alcohol-containing beverages - 20 ° С, which does not happen when the moonshine only follows from the tube, going through the cooler.

Attention. If you need exact fixtures, add a parrot additionally thermometer.

Knowing the temperature of the distillate and seeing the readings of the alcoholometer, it is easy to calculate the real fortress of the moonshine using the online (or the program downloaded to the PC).

How to make your own hands according to the scheme?

To build a parrot for a moonshine with your own hands is not as hard as it may seem. Parrots make from a wide variety of materials - ranging from medical syringes to PVC pipes. But before choosing a material it is important to make sure that he does not allocate harmful connections And will not give a moonshine of an unpleasant smell and the taste.

Consider the most popular option - from stainless pipes.

Schematically, the device is shown in the picture:

It works like this:

• the distillate arrives at first into the introductory tube through the funnel (1). There are two options: either the parrot made with their own hands just substitute for a snake, from where the moonshine drips (then the funnel is necessary), or tightly connect with the coil;
• from the tube, the moonshine enters the cylinder (2), equipped with a steamer on the weight. Georgic is needed so that the device stood in an empty cylinder and could not hit the wall, and when it filling it with liquid;
• the liquid rises up to the end of the cylinder (3);
• and begins to move through the edge, falling into a funnel (4), specially intended for the collection;
• moonshine follows through the tube (5) to the jar or other capacity.

If you do not fix the rigidly made parrot for the moonshine with your own hands, then be sure to get comfortable about standard base For him, so that he does not turn over from random touch.

Important! The cylinder should be higher than a alcoholometer at least 3 cm, and the same - wider (taking into account the weight of the aerometer). Reception funnel should always be higher than the main cylinder!

From the syringe

This homemade for 50 rubles It will help to control the Fortress of the Moonshine at the "Exile" stage and will require a little effort. It will take:

• two 50 ml syringe (can be three, if you need a high parrot;
• fastened adhesive gun;
• dropper;
• mini gas burner or lighter;
• gypsum;
• metal cover (screwed) for cans.

Now the most interesting thing:

1. Needles and pistons still remove.
2. On the tips (where the needle is inserted) with both syrins with a tube from a dropper of a length of centimeters 10 - 15.
3. We take the chain in which the needle hides and convert it into the tube (cut off the deaf end).
4. In the upper part of one syringe, right under the side drill holes in the size of the pipe resulting from the chain.
5. Heat the mini gas burner hole and insert there with a tube - "spitting" it at an angle of degrees 40. It is the nose of the parrot.
6. Additionally, we glue the spout with a glue gun.
7. At the mark 50, we glue the second syringe to the first connected to it tube. The second is higher than that with the spout.
8. From the pistons we make legs, disconnecting the gum, "working" inside the syringe during injections. We glue the legs on both sides of the syringe with a spout.
9. For the durability of the construction wept the plaster, pour into the lid and fix the feet of the parrot in it.

Such a parrot will not fall. Works like that: The upper syringe is substituted under the receiving tube, from which distillate dripping, gradually filling the parrot. In the lower syringe put a alcoholometer, and in which the device swims, merges into the jar through the key. Process under control!

From copper tube

To create a flask of constant control of alcohol for 300 rubles From the copper tube, you will need:

• copper tube with a thickness of 22-25 mm by internal diameter. Its length is 25 cm;

Important. Select the height of the tube depending on the length of the range (the average length of the device is 22 cm, the thickness is 1.9 cm). Be sure to alcoholometer must be 2-3 cm below the edge of the parrot.

• copper tube 07 - 10 mm (the day of the parrot and the supply tube from the refrigerator);
• copper adapter from the 22nd pipe on the 35th;
• plug under the main tube.

Sketchy drawing of the parrot you see in the picture, on it and act.

Attention. If you do not plan to connect to the device, you will need additionally funnel On the thin receiving tube, the parrot, in which the distillate will be flushing, passing through the cooler.

Causes of Mother Understanding Masters called Parrotcontinuous Control Device Fortress Using it, it is possible to determine the strength of the liquid, which the moonshine apparatus is in real time.

Why do you need it? First of all, to determine the moment when you already need to "cut off the tails" and get distillate into separate dishes.

"Tails" - very useful for the moonshrix liquid. Although it is no longer suitable due to the low fortress, but added to the maiden, will help get in the future more strong moonshine.

The design is called a parrot, probably for some similarity with a bird having a keyboard. Consider the device of the parrot and find out whether it is possible to build a high-quality parrot for the moonshine with your own hands and which material for this should be chosen.

Constructive features

Briefly a parrot device that you can see in this picture can be described as follows:

• Two communicating vertical tubes acting on the principle of connecting vessels.
• The first of the tubes (thin) brings from the bottom to the main vessel distillate coming from the refrigerator.
• Basically, the vessel (it is in the form of a larger diameter cylinder) is assembled distillate and gradually accumulates. In this cylinder floats the range, constantly reporting the fortress of the filling vessel of the alcohol-containing fluid.
• The top of the main cylinder is a tube through which the finished product flows into a substituted jar.

Pros and cons device

The parrot for the moonshine makes it possible to continuously control the fortress of the moonshine, which comes out of the refrigerator of the moonshine. A parrot is installed behind the refrigerator, alcohol-containing liquid is assembled into it.

List the mainadvantages This design:

• The parrot allows you to monitor the distillate fortress to cut off the "tails" in time.
• Easy use and self-making.
• Connecting to the moonshine device of any design, including distillation columns.
• Relative cheapness.

Reference. The last jets of the moonshine, the fortress of which is below 40 °, have an increased content of the seawous oils, so undesirable in the moonshine. Their selection in separate dishes already at the first (especially - the second) distillation ensures the production of a clean product.

disadvantages :

• Approximate measurement of the fortress. Missing with real degrees - within 3 °.
• Distillate flow. The areaometer cannot instantly respond to the changing strength, so readings with a delay in time, and therefore dedustibility may already be lower than the aerometer shows at the moment.
• The generally accepted temperature of measuring the fortress of alcohol-containing beverages - 20 ° С, which does not happen when the moonshine only follows from the tube, going through the cooler.

Attention. If you need exact fixtures, add a parrot additionallythermometer .

Knowing the temperature of the distillate and seeing the readings of the alcoholometer, it is easy to calculate the real fortress of the moonshine using an online moonshinger calculator (or the program downloaded to the PC).

How to make your own hands according to the scheme?

To build a parrot for a moonshine with your own hands is not as hard as it may seem. Parrots make from a wide variety of materials - ranging from medical syringes to PVC pipes. But before choosing a material it is important to make sure that hedoes not allocate harmful connections And will not give a moonshine of an unpleasant smell and the taste.

Consider the most popular option -from stainless pipes .

Schematically, the device is shown in the picture:

It works like this:

• the distillate arrives at first into the introductory tube through the funnel (1). There are two options: either the parrot made with their own hands just substitute for a snake, from where the moonshine drips (then the funnel is necessary), or tightly connect with the coil;
• from the tube, the moonshine enters the cylinder (2), equipped with a steamer on the weight. Georgic is needed so that the device stood in an empty cylinder and could not hit the wall, and when it filling it with liquid;
• the liquid rises up to the end of the cylinder (3);
• and begins to move over the edge, falling into a funnel (4), specially intended for the collection of moonshine;
• moonshine follows through the tube (5) to the jar or other capacity.

If you do not fix the rigidly made parrot for the moonshine with your own hands, then be sure to get comfortable aboutstandard base For him, so that he does not turn over from random touch.

Important! The cylinder should be higher than a alcoholometer at least 3 cm, and the same - wider (taking into account the weight of the aerometer). Reception funnel should always be higher than the main cylinder!

From the syringe

This homemade for 50 rubles will help control the Fortress of the Moonshine at the "Exile" stage and will require a little effort. It will take:

• two 50 ml syringe (can be three, if you need a high parrot;
• fastened adhesive gun;
• dropper;
• mini gas burner or lighter;
• gypsum;
• metal cover (screwed) for cans.

Now the most interesting thing:

• Needles and pistons still remove.
• On the tips (where the needle is inserted) with both syrins with a tube from a dropper of a length of centimeters 10 - 15.
• We take the chain in which the needle hides and convert it into the tube (cut off the deaf end).
• In the upper part of one syringe, right under the side drill holes in the size of the pipe resulting from the chain.
• Heat the mini gas burner hole and insert there with a tube - "spitting" it at an angle of degrees 40. It is the nose of the parrot.
• Additionally, we glue the spout with a glue gun.
• At the mark 50, we glue the second syringe to the first connected to it tube. The second is higher than that with the spout.
• From the pistons we make legs, disconnecting the gum, "working" inside the syringe during injections. We glue the legs on both sides of the syringe with a spout.
• For the durability of the construction wept the plaster, pour into the lid and fix the feet of the parrot in it.

Such a parrot will not fall.Works like that : The upper syringe is substituted under the receiving tube, from which distillate dripping, gradually filling the parrot. In the lower syringe, they put a alcoholometer, and the moonshine in which the device swims, merges into the jar through the key. Process under control!

From copper tube

To create a flask of constant control of alcoholiness for 300 rubles from the copper tube, you will need:

• copper tube with a thickness of 22-25 mm by internal diameter. Its length is 25 cm;

Important. Select the height of the tube depending on the length of the range (the average length of the device is 22 cm, the thickness is 1.9 cm). Be sure to alcoholometer must be 2-3 cm below the edge of the parrot.

• copper tube 07 - 10 mm (the day of the parrot and the supply tube from the refrigerator);
• copper adapter from the 22nd pipe on the 35th;
• plug under the main tube.

Sketchy drawing of the parrot you see in the picture, on it and act.

Attention. If you do not plan to connect to the device, you will need additionallyfunnel On the thin receiving tube, the parrot, in which the distillate will be flushing, passing through the cooler.

Now you have a clear idea of \u200b\u200bhow to make a parrot and constantly monitor the Moonshine Fortress (read: ).

To determine the degree of alcohol distillation, parrots are used for the moonshine. These are homemade or purchased devices that allow you to quickly learn the fortress of distillate without the need to overflow the part of the beverage into a separate container.

So, the parrot is a small device of metal or plastic with an alcoholometer that allows you to control the strength of the product at any time. The principle of action is extremely simple and based on the elementary laws of physics - the reporting vessels and archimedean strength.

In fact, it is a cylinder full of moonshine, with two tubes. One of them serves to lead the fluid, the other, on the contrary, leads alcohol into the container. The cooker floating in the cylinder measures the alcohol fortress in the distillation process.

Constructive features

The simplest parrot option is an ordinary funnel, which is not attached to the moonshine. Such a design is extremely unreliable, because it can turn over, spill content. More popular models with tubes are fixed to the machine. They are not as versatile, but more reliable in operation.

Some parrot variants are equipped not only with a alcoholometer. The device may also be a thermometer for measuring fluid temperature. This knowledge allows you to adjust the alcohol fortress.

Pros and cons device

The parrot allows you to continuously monitor the distillate fortress leaving the refrigerator. The main advantages of this small device include:

1. Ability to control the Fortress of Moonshine.
2. Easy to operate and build.
3. Compatibility with any moonshine.
4. Low cost.
5. Timely selection in a separate capacitance of self-sigh oil (its fortress is below 40 degrees).

The flaws from the parrot is not so much, but they can still be essential in the manufacture of a moonshine:

1. The error in measuring the fortress is three degrees in a large or smaller side.
2. Due to the sketchiness of the moonshine, the area meterometer cannot instantly respond to changes in the fortress.
3. In the tank, the temperature of the alcohol does not always correspond to the accepted +20 degrees after passing through the refrigerator. At fluid temperature below this value, the measurement of the fortress will give an error.

To work the parrot was more accurate, it must be provided with a thermometer. To calculate the correct mogon fortress, it is enough to know the exact temperature and alcohol data. The obtained indicators are sufficient to enter the dump truck in the online calculator, the program instantly calculates the final result.

How to do yourself?

Make a parrot for the moonshine apparatus with their own hands, just enough the necessary materials and follow the assembly instructions. For these purposes use:

• stainless steel;
• glass;
• copper.

There are options with the manufacture of a device from plastic, silicone, PVC and other available materials. Of course, the parrot will work, obeying the laws of physics, but some of the listed materials can enter into a reaction with a moonshine, highlighting toxic substances into liquid. This will distort the taste of the finished drink and can cause poisoning.

To create a cylinder, pick the width of the tube so that it is easy to enter it easier. He should not touch the walls or bottom. The accuracy of measurements is easy to check: the flask must be in a half-meter wider than the bulk part of the alcoholometer. The height of the cylinder is also important, it should not be below the two-three centimeters relative to the measuring instrument.

The quality of the work of the parrot for the moonshine made by their own hands does not depend on the dimensions of the apparatus itself. It is more important that the conditions under which the law of reporting vessels work are complied with. For this, the funnel tube through which the moonshine is blown into the flask, should be higher it, and the drain hole, on the contrary, is lower.

Parrot of corrugated stainless steel

it the simplest way Make a parrot with your own hands. For the manufacture, a corrugated tube from a stainless steel is 50 cm long. For the whole process will leave no more than 10 minutes:

1. Bend the tube so that both ends are located in parallel to each other.
2. One of the ends bend, cutting the hole for the alcoholometer in the pipe. It will be a parrot spout.
3. Long end to cut so that it is convenient to insert a funnel.

For a stand, you can take a small wooden bar, cutting into it a recess in the width of the tube.

Parrot of two syringes from the pharmacy

The most inexpensive version of the self-made parrot, which will cost no more than fifty rubles. What is needed for assembly:

• syringes per 50 ml (two pieces);
• dropper;
• lighter or small burner;
• gypsum;
• the usual metal cover is quite wide for the stability of the structure.

Assembly process:

1. Remove the pistons from the syringes and remove the needles.
2. Instead of needles, on the tips to put a dropper. The length of the tube must be about 15 cm.
3. Cut the tip on a plastic needle case. This tube will be used to remove the fluid, the hole is done under it.
4. The nose of the parrot is soldered with a lighter into the hole under the side of the first syringe at an angle of 40 degrees.
5. For additional attachment and insulation, you can use a glue gun.
6. The second syringe is glued to the first top.
7. Early pistons are attached to the bottom and act as legs for support.
8. In order for the parrot stood, the legs are interinted in the gypsum, filled into the lid from the can.

Parrot with such a design is stable and works fine. It remains only to substitute the container where the moonshine will flock through the spout, passing through the flask.

Parrot made of copper tube

Creating a copper parrot will cost about 300 rubles. For him will be needed:

• copper tube 25x250 mm;
• copper tube with a diameter of 10 mm;
• adapter;
• cap for a wide tube.

You can collect a parrot from copper using any accessible scheme. In the event that the device is not connected to the device, you will need to weld to the receiving pipe to the funnel so that the moonshine from the refrigerator is glad.

Purchased parrots

You can not break your head over the schemes and structures for homemade parrots and buy a finished factory option. The cost of models, depending on the complexity and functionality hesitates from one to five thousand rubles. The high price is due to the fact that factory devices are produced from metals.

The disadvantage of such structures is their complete opacity, as a result of the spiriter will have to get every time you get to know the fortress of the moonshine. Instead of metal flasks, you can buy glass, which are sold in specialized stores supplying chemical laboratories.

In any case, a purchased parrot or his own hands, he will be a good helper in the production of alcohol. After all, it is important to know the correct fortress of alcohol with distillation for confidence that the moonshine is spilled from harmful impurities.

your mark

The refinement process is not as simple as it seems at first glance. It is not enough to simply put a distillation cube on the stove and wait until the moonshine flows. In distillation alcoholic beverages There are some subtleties.

One of the important nuances is the cutting off the "heads" and "tailings". In the "heads" there are light factions of vapors, which are allocated for the boiling of Braga. They have very little ethyl alcohol, and basically contains poisonous syuvous oils and methanol. In the "tails" there is also a small content of ethanol, they contain heavier fractions and water. It is also not recommended to use "tails" inwards, but they are often used at the next bookmark of Braga.

It is to cut off the "tailings" it uses such a device as "parrot". It serves to measure the product fortress at the exit from the device in constant mode. Of course, it is possible to cut off the "tails" and in the old manner - according to the rule "Goney, while burning." During distillation, many binders ignite the Pervach in the tablespoon. If it burns - you can continue to drive if not - the fortress is already small and left "tails". You can also use a alcoholometer - periodically pour the exit product into the flask and measure the fortress. However, both of these methods require a periodic verification of the moonshine, and the parrot for the moonshine is convenient for the constant automatic control over the moonshine fortress.

How the parrot works

This device is a system of communicating vessels. It consists of three tubes and a carometer. The main tube is in a vertical position, the supply tube from the serpent is attached to it from below, and from above, removing in the receiving container. The moonshine comes through the bottom tube to the main part, fills it and through the upper goes in the dishes for the moonshine. In the main tube there is an areaometer that constantly freezes the fortress of the product. When the area begins to show too low fortress, distillation can be stopped.

The benefits of this device include constant control over the strength of the product, simplicity to use. In addition, it is suitable for distillers, rectifiers and brighted columns of any type. But there are also disadvantages - an error of 2-3 degrees, some delay in the actual indicators of the product of the product.

How to make such an appliance yourself

To make a parrot for a moonshine apparatus with your own hands, it is enough to have the simplest skills of soldering and bend pipes. The best material for making a parrot is stainless steel or copper. Some craftsmen make such a device from plastics, plumbing pipes or even from the syringe. However, it is worth remembering that these materials in contact with ethyl alcohol allocate harmful impurities.

It is important to optimally select the dimensions of the tubar tubes. First, it is necessary to navigate the size of the area. It should be freely placed in the main tube, without touching its walls. Otherwise, the effect of the piston will work - the liquid will simply push it out of the flask. However, too larger volume of tubes is also undesirable - the liquid will slowly replace in the device, respectively, the delay in the real indicators of the product of the product will be greater. In order for the parrot to slow down the process of distillation, the diameter of the supply and discharge tubes should be no less than the diameter of the coil.
Another important moment - The receiving funnel of the introductory tube must be above the top point of the main flask, and the tube of the alcoholometer - above the drain level. Otherwise, the law of reporting vessels will not work, and accordingly the device itself.

Parrot is a very useful and convenient device. It is not necessary to neglect its use, especially since it is not so difficult to make it yourself, but in operation it does not require any additional effort. In stores you can find the factory making parrots, their cost is quite affordable - in the area of \u200b\u200btwo thousand rubles.