Photo report we make a gazebo with our own hands from the profile. Do-it-yourself gazebo made of metal: choosing a project, size, drawing

Country estates have long ceased to be used for their intended purpose, namely for growing various crops in the summer. Currently, an increasing number of land owners are striving to make their summer cottage a place of rest and relaxation, where after working days with their usual city bustle they can come, stay in silence and just relax. For these purposes, comfortable gazebos are often built, since their construction does not require large financial investments and special building skills.

At the same time, one of the most common and budget materials used in the construction of this structure is a metal profile. In the article, we will tell you how to make a gazebo from a profile pipe with your own hands, show diagrams, drawings, photo and video instructions, and also deal with a number of important features of the component materials and installation features.

Profile specifics

The structure made using the profile looks quite original. You can make such a building in the shortest possible time. The main condition is the presence of experience with welding equipment.

The source material from which the frame of the gazebo is made is pipes, in most cases occurring with a rectangular or square section, made of carbon and low alloy steel.

Raw materials are characterized by sufficient strength, multilateral resistance to harmful effects and practicality.

Profile pipes, taken as the basis of the gazebo, endow the building with a number of positive characteristics. The main ones are:

• low specific gravity of the structure (excludes the preparation of a powerful base);
• long period of operation;
• acceptable cost of the material;
• fire resistance;
• no need for periodic repairs.

When starting to manufacture a gazebo, it is worth deciding in advance on the type of construction, drawing up drawings, preparing the necessary tools and materials. In a huge variety of forms used, a gazebo made of profile pipes can be of the following types: rectangular, square, hexagonal, etc.

In the absence of experience in the construction of gazebos, you should choose the classic options - square or rectangular, since they are easier to plan and subsequent installation.

The next step is the selection of materials used. To make a practical and inexpensive gazebo, you will need to prepare the following consumables:

• metallic profile;
• polycarbonate;
• cement or concrete;
• accessories;
• anti-corrosion alkyd primer or paint.

Having finished with the previous points, we proceed to consider the question of how to make a sketch. The plan can be drawn up both independently and by contacting specialists for help. For greater clarity, you can use the attached drawing, adjusting it to the desired dimensions.

It is necessary to pay special attention to the manufacture of the drawing, since the amount of material used, the aesthetics and the duration of the gazebo's service life depend on the accuracy of the calculations made.

The final event is the preparation of the instrument:

• drill with a set of drills for metal work;
• grinder or angle grinder;
• channel beams;
• bayonet shovel;
• self-tapping screws for metal and thermal washers in the color of the finishing material.

We proceed to determine the best location in the local area. In the case of a reservoir, it makes sense to place a gazebo on the upper edge of the coast. The building should be located on a well-visible site, as it is an adornment of the entire landscape design.

Having finished with the choice of a place, we proceed to the preparation of the site. To do this, in accordance with the plan drawn up, it will be necessary to remove the sod from the soil along its perimeter and apply marking lines. Next, we dig indentations according to the number of support pillars with a depth of 50–60 cm.

As racks, a profile with a length that takes into account the gap of the pipe in the prepared pit is very often used. The optimal cross-sectional values ​​of the future support element vary from 80 × 80 mm with a wall thickness of 2.5–3 mm. To give greater stability, it would be useful to weld the heels to the supports.

For the construction of a gazebo, it is most rational to use a pile or columnar type of foundation. Having finished with digging holes, we proceed to the installation of support posts and tamping the place of contact with the ground. To achieve this goal, it is necessary to fill the recesses with crushed bricks or small stones, then fill them with a cement-sand mixture or concrete and level them to the building level.

Metal strapping includes the manufacture of a metal frame, which rests on supports and is subsequently the basis for the entire structure. It must be equipped and placed at the optimal height so that in the future, when entering and exiting, a person does not have to do unnecessary actions to overcome this element of the gazebo.

Sheathing construction involves the use of polymeric materials. Sheets are fastened by means of self-tapping screws or bolts to the truss system. The rafters are made from a profile pipe similar to the one presented above. Leaning on the supports, the beams converge in the center of the structure at an angle of 10–15°. Next, using a thin metal profile, we carry out the crate in increments of 35–40 cm - this will significantly reduce the windage of the polycarbonate and will not allow the sheets to bend unnecessarily, loosening the joints.

Having no experience in making a roof, the emphasis should be on the classic gable structure with a triangular shape. If the length of the rafters exceeds 150 cm, then it will be useful to weld additional spacers and a central beam to them.

For the design of the walls of the structure, geometric or bizarre shapes made of metal rods are suitable. You can also use a wooden crate in combination with fresh flowers or vines climbing from the base to the roof. If you paint the wooden and metal elements of the gazebo in a timely manner, then it will serve you for many years.

Wood is usually coated with antiseptic and varnish, which can be applied both before the installation process and after. As for metal elements, in this case it should be borne in mind that surface treatment is carried out upon completion of all work, since the painted components are quite difficult to weld with each other.

In conclusion, I would like to note that the success of any construction lies in strict adherence to the instructions, the correctness of the drawn up drawing and the accuracy of the measurements taken. The gazebo, made using profile pipes, will not only delight the owner and his guests with its magnificent appearance for a long time, but will also become a place where you can relax, forgetting about the bustle of the city.

Video

You can learn how to make a gazebo from a profile pipe and polycarbonate by watching the video:

Schemes and drawings

According to the scheme, it is easier to make a gazebo. We suggest you choose the appropriate design option:

Photo

The gazebo is a great opportunity to relax in comfort in the fresh air. This building can be found in almost every yard, on every personal plot. Today they are built from wood, stone, brick, concrete, but the most openwork and lightest gazebos are made of metal.

In this article we will talk about the types and advantages of metal arbors, what they are made of, we will analyze in detail how to design the structure correctly, calculate the dimensions and make a drawing. And we will also give detailed step-by-step instructions on how to make a gazebo from a metal profile with your own hands.

Metal superiority

There are many advantages to metal gazebos. In a metal profile construction, you can easily express an infinite variety of shapes, sizes and proportions, in a small architectural form you can embody the most incredible fantasies. Needless to say, high-quality metal summerhouses are durable and reliable, and besides, they are very light buildings.

Artistic forging will decorate even the simplest gazebo

With proper processing and care, metal gazebos can stand for many decades, they do not require expensive maintenance during operation, and if necessary, they can always be repaired.

And if wooden buildings need to be protected from chemical and biological influences, from insects, rot, fungi, then perhaps the only serious enemy of the metal profile is rust, but with modern processing methods this has ceased to be a problem. Good protection is powder coating, various primers and anti-corrosion compounds, hammer paint, which can be applied independently.

Advice: Metal is a material with high thermal conductivity, it heats up quickly and cools down just as quickly. Therefore, if a metal gazebo is entwined with vines and or perennial loaches, then it is better to remove them from the frame for the winter, otherwise they may freeze out.

Arbors made of metal, photo build a design from a square pipe

Design features

By and large, all metal arbors are a welded or prefabricated frame at the corners, on which a kind of truss system for the roof is fixed.

Material

The frame is usually made of a profile pipe: round or square, corner, art rolled. For large structures, a frame welded from a channel can serve as the basis.

In terms of installation speed, garden metal gazebos have no competitors; with ready-made drawings and the availability of material, a small, simple welded structure can be made within a few hours.

It is impossible to ignore light, summer gazebos on a collapsible aluminum or iron frame, with an awning roof, and sometimes with canopy walls. The modern market offers a huge number of summer pavilions, large and small, but, as a rule, they are rectangular or square, sometimes multifaceted.

Metal gazebos for summer cottages, photo of a collapsible structure on an iron frame

And of course, forged arbors, there is no limit to fantasy, rectangular and round, in the form of carriages and ships, decorated with tracery curlicues and very simple. A wrought iron gazebo is undoubtedly a special chic of landscape design.

And a completely new type of summer buildings - metal-plastic gazebos. These are collapsible products made of a steel profile treated with an anti-corrosion compound and covered with a thick layer of PVC. They do not rust, do not rot, they are not afraid of rodents and fungi, they are not afraid of moisture and temperature changes. When installing a metal-plastic gazebo, it is important to properly prepare the site, the elements should not come into contact with the ground. It is better if it is a slab foundation or columnar.

The product does not require additional maintenance during operation, and this saves money and time

Design

The types and style of gazebos are striking in their diversity. Even simple garden gazebos from a professional pipe can be decorated with openwork forged elements, and the building will literally be transformed.

I must say that welded gazebos made of metal combined with some other material look very original, for example, if part of the supporting pillars is made of natural stone, or the parapet is made of decorative wooden lattice.

Photo of metal gazebos combined with brick

Recently, it has become fashionable to make gazebo pavilions. The closed part of the building is laid out of brick, sometimes glazed, and a metal open canopy is attached to it. The entire structure can be made under one roof, but most often polycarbonate is used for the metal frame.

Photo of a gazebo from a profile pipe and polycarbonate

Forms

The metal is very plastic, easy to weld, which allows you to make gazebos of various configurations: rectangular, round, multifaceted, combined from several geometric shapes and curvilinear.

Note that metal gazebos always look light and elegant, and if you correctly think over the design and decor of the structure, then it is difficult to find equal beauty and luxury to them. They can easily compete with the lace of wood and the beauty of natural stone. And besides, metal goes well with almost any material, so there is no limit to the perfection of metal arbors.

Country gazebos made of metal, photo of the original design, welded from metal sheets and decorated with forging

Design

An independent gazebo project should include:

• a site plan with a designation of a place for a gazebo, other outbuildings and trees should also be marked on it, so that during construction you do not have to face an annoying hindrance;
• a sketch of the building, you can draw it yourself or find a picture on the Internet;
• a drawing showing the location of load-bearing walls or pillars, as well as the overall dimensions of the gazebo;
• a scheme for pouring the foundation, usually a columnar foundation is laid under small architectural forms: it is imperative to provide supports at the corners and in the middle of the structure;

Advice: To use the gazebo with comfort, do not forget about the wind rose in your area. Locate the entrance on the side where the least wind blows.

Sketches

Of course, looking at photos of beautiful structures is sometimes breathtaking. Beauty! Want! But do not forget that a do-it-yourself gazebo will be built from metal, so choose simple designs that echo the design of the main house. Of course, if the plot is large, and the gazebo will hide in the depths of the garden, among the trees, then you can give free rein to your imagination.

Also keep in mind that it is easiest to build a rectangular metal gazebo, small in size, with a vaulted polycarbonate roof, but even in this case there are difficulties, you will have to bend the pipes, and this will require a template or a pipe bender. The roof can be replaced with a hipped one, but then a little more material is required.

It is better to design a building on vertical pipe supports (round or square), and after the frame is assembled, you can buy ready-made forged elements and decorate a gazebo from a metal profile.

Iron gazebos, photo of a light, portable combined design

Dimensions

The dimensions of the gazebo directly depend on the functionality of the building, if this is a room for two, then 3-4 m 2 is enough, for a large company the area is calculated based on a comfortable stay for 1 person - 2-4 m 2. But as practice has shown and according to numerous reviews on the forums, it can be argued that the most popular gazebos are 3 * 3 m, 3 * 4 m, 6 * 4m.

Iron gazebos, photo of a metal profile structure decorated with forging elements

If the site is small, then it is advisable to build a small metal gazebo-barrel, you can’t walk around in it, but you can sit at the table in a close company.

Photo of a gazebo from a metal profile, a portable, practical and ergonomic frame for small garden plots

Important: If the gazebo from the profile is small and light, then the foundation can not be laid, it is enough to clear the area and place flat stones or blocks under the corners. But it is better to pave the area under the gazebo with paving stones.

How to weld a gazebo from a metal profile with your own hands

The gazebo made of metal photo, the drawings and step-by-step manufacturing instructions of which are described below, has a rectangular shape 3 * 4 m, 2.7 m high, the roof is hip, the structure is assembled from a metal profile of different sections.

The parapet of the gazebo can be made from ready-made forged gratings, sewn up with wood or polycarbonate

The construction of a gazebo for summer cottages made of metal begins with clearing the site for the foundation. Remove debris, transfer the markings from the drawings to the terrain, pull the rope around the corners, check the geometry of the corners.

How to make a foundation

Remove the top layer of soil. Dig holes for the posts, 500-700 mm deep. In our case, these are 12 pillars, as shown in the diagram below.

Foundation, pillar layout

The pillars can be laid out of bricks or blocks, in which case do not forget about the reinforcing strapping every 3-4 rows, you can also use asbestos pipes or ready-made concrete blocks. We will pour monolithic concrete supports. At the bottom of the pit, pour gravel 100 mm, sand 100 mm, tamp. Tie the frame of the post from the reinforcement, 4 ribbed rods of 8-10 mm are enough, you can simply poke the reinforcement into the ground, but in this case it will quickly rust.

At the bottom of the pit, on a pillow, pour concrete, 70-100 mm thick, install the prepared reinforcing cage into it, wrap it in 2 layers with roofing material, pour concrete so that the post is 100-200 mm above ground level. Insert rods into the middle of the posts so that they stick out. We will tie the frame of the gazebo to them.

Good to know: Reinforced concrete column with a cross section of 400 * 400 mm can withstand a load of up to 40 tons.

Concrete pillars can be loaded after 28 days, when the mortar has fully set

Installing the metal base

For vertical supports, we take square metal poles 100 * 100 mm, but smaller sections are also suitable. Install the vertical posts on the foundation pillars and secure with anchors, additionally weld them to the reinforcement previously released from the foundation.

To increase the fulcrum and reliability of fastening, weld the sole from one end of the pillars

It is advisable to connect the columns along the perimeter from the bottom along the perimeter and the middle ones with a channel 100 * 100 mm. From above, we tie the supports with a rectangular pipe, with a section of 40 * 40 mm, 40 * 60 mm, we also connect the central supports with each other. It remains to make the truss system.

The rafters are boiled on the ground, from a pipe 20 * 20 mm. Can be assembled as a whole and then lifted with a crane. And you can make farms in parts. Separately, we cook the ridge beam, in the photo there is a rectangle in the middle, then corner trusses. In place (at the top), the truss system is additionally connected with metal pipes.

The truss system can be made of both metal and wood.

We clean the metal frame from rust, scale and oil stains, primer and paint. From above, we sheathe the rafters with plywood, 12 mm thick, moisture resistant, and lay a soft roof on it. We lay logs on the floor, wooden bars 50 * 100 mm, sew them up with a tongue-and-groove board or decking.

Do-it-yourself metal gazebos can be decorated with forged elements or wood, it all depends on the design of the metal structures and on the construction budget

Pergolas in the summer cottage are installed quite often. Various materials are used for their construction: wood,. It all depends on your financial capabilities and preferences.

An important condition is the harmonious combination of the house and other structures in the countryside. A gazebo made of metal profiles is an attractive construction option in terms of price and appearance.

At the initial stage of construction, gently decide: what shape and size it will be, on which it will be installed, and it is also necessary to resolve the issue with the material and shape of the roof.

frame

The first step is to build a frame. For this, pipes made of metal profiles are used. This material is durable while being light in weight. In the work, a square pipe from a metal profile and a rectangular one are used.

The first option is preferred because it has greater strength. The metal pipe has a different thickness, which is also taken into account when installing the frame for the gazebo. If a gazebo from a metal profile is conceived as a small structure, then you can take a profile with thin walls for work, and vice versa - overall gazebos need a strong frame made of a thick-walled profile.

Note. When choosing a place to install a gazebo, consider factors such as: distance from the road and prying eyes, ease of access to it, as well as partial shade from trees.

If there is not enough space

Results

To protect the metal from rust, it is necessary to treat it with special anti-corrosion agents, beat off scale and align the seams with a grinder. Further, all metal pipes that will form the frame of the gazebo are cleaned of rust, degreased with a solvent and coated with paint. At the last stage, the roofing is made and the wooden parts are fixed.

Foreword

One of the greatest advantages of owning a plot is the possibility of a secluded pastime with close people and friends in the bosom of nature, but in close proximity to all the benefits of civilization. To make the rest more comfortable, it is better to organize it in the gazebo. Having built it from metal, you can not only get reliable protection from the vagaries of nature, but also a masterpiece of small architectural form - depending on how you put your hands to it.

Where does the construction of a metal gazebo begin?

You can start by choosing a location, and then adapting your own ideas to it in the form of a project or drawing. Or, on the contrary, after drawing up a project for a future gazebo, choose a suitable place for it.

Already at the stage of drafting the project, it should be decided how budgetary or “on a grand scale” the design should be. In this case, the following points should be taken into account:

• the gazebo is not, but a place of rest and should have an attractive appearance, preferably combined with the surrounding landscape, as in the photo;
• if this is a budget option as in the photo, then when designing, one must proceed from available and / or affordable inexpensive materials, as well as one’s own skills and capabilities to carry out the necessary plumbing, welding and other work so that one does not have to spend money or minimize the costs of attracting third-party specialists;
• if it is planned to equip (for example, forged, as in the photo), a complex structure, and the like, then you must first find out if there is an opportunity and specialists to perform “on the side” those works that cannot be done by hand;
• the need and possibility of bringing communications to the gazebo: electricity, plumbing, heating (for the all-weather option);
• will any equipment be installed in addition to the table and seats (benches) as in the photo (barbecue, oven, heaters, tandoor and / or something else);
• for what approximate number of people should the area of ​​\u200b\u200bthe gazebo be calculated.

Then you should decide on the shape of the gazebo (round, rectangular, six-, octagonal or other), size and type. The open one has no walls and low parapets, due to which it is comfortable to be in it only when the weather is good enough. Semi-open protect from rain and wind to the extent that it is provided for by their design. Closed is a kind of glazed house, in which, if there is insulation, heating or heaters, it will be comfortable even in winter. The glazing can be removed for the summer.

After that, you need to decide which floors will be in the metal gazebo. Do not leave them ground and / or at ground level, as they will be flooded with water during rain. It is necessary to at least provide for backfilling with gravel and / or sand, but it is better to make concrete or lay out paving stones, natural stone or concrete slabs. The best option is a floor made of boards with an air gap or waterproofing.

Designing a gazebo made of metal

We draw up a project or sketch with our own hands, based on the above parameters. We make it as detailed as possible. The drawing should indicate not only the dimensions, but also all the details, elements of the gazebo, as well as their dimensions, the material from which they are made, the method of connection or fastening with other parts.

The basis of the design of any metal gazebo is the support posts. For structures with corners (rectangular and similar), their minimum number is equal to the number of corners, and for round ones, preferably at least four. If necessary, intermediate supports are added. To give the structure of the gazebo greater rigidity and strength, transverse veins (beams) from a metal profile should be fixed between the uprights. This should be done in such a way that later you can conveniently fix other details to them with your own hands: decorative elements, fencing, cladding, floor, seats, roofing and others.

The easiest way is to make a gazebo from a metal profile - round and rectangular pipes, corners, channels and I-beams - besides, for bolted connections, you don’t have to “fence” a lot of special brackets and brackets with holes.

Square, hexagonal and round bar, as well as sheet metal and strip can be used for decorative filling and auxiliary elements. For roofing - corrugated board, polycarbonate, PVC or other materials.

Welded joints look the most aesthetically pleasing, but to create them, you need skills in working with a welding machine and a grinder, which is used to process finished seams. The easiest way is to assemble everything with bolts and nuts with your own hands, besides, if necessary, the gazebo can be easily dismantled and moved to another place. To do this, on the bearing racks and transverse profiles, it is necessary to provide for the presence of brackets (mortgages) with holes.

Construction of a metal gazebo

The roof structure may consist of transverse beams attached to the bearing racks and protruding beyond the boundaries of the gazebo by 0.5 m so that water flowing from the roof does not flood the structure. The distance between them should be 2 m. Longitudinal ones made of metal or wood are attached to the transverse beams in increments of 1 m. Roofing material is attached to the resulting crate. If it is metal, then holes for fasteners are pre-drilled in it.

According to the created drawing, we calculate the required amount of materials and determine the approximate weight of the gazebo. Most metal arbors, in particular, from an aluminum profile as in the photo, have a small mass, do not need to equip a capital foundation, and can even be portable. Closed-type structures, as in the photo and weighted with decorative or roofing metal elements, must rest on the foundation. Usually it is poured in the form of small concrete pillars under each rack or gazebo support. Much less often they make a monolithic slab.

Racks can be "sinked" in the ground or a layer of rubble, or concreted at the base of the foundation to a depth of 20–30 cm. In this case, the length of the metal profile of the racks should be increased by an appropriate value. You can do it differently - concrete mortgages into the foundation, to which the racks will then be welded by welding. If you make mortgages with a bolt hole, then screw them on. Racks of light structures as in the photo can simply be placed on level ground. On this, the drafting of the project with your own hands can be considered complete.

The construction of a metal gazebo begins with clearing, leveling and marking the place allotted for it. Then we make a foundation or a crushed stone pillow under the racks, which, according to the drawing, we either immediately concrete or install later. At the same time, if the floor is not wooden, we do its own landscaping: we fill in gravel, and then sand; we lay paving stones or tiles (on top of the sand); pour a concrete slab or something.

After the final setting of the foundation, we install the racks (if they were not concreted) and assemble the design of the gazebo with our own hands according to the project. If the metal profile is connected by welding, then after the installation work is completed, we clean all the seams from scale, and then cover it with an anti-corrosion primer. After that, the entire structure is painted in the selected color with paint for metal or powder.

Original buildings will help unique. Pergolas from the profile are a great chance to be outdoors as long as possible during your vacation. It is not necessary to be a professional builder to create an original landscape on your site. Anyone can build from a metal profile. This material is easy to work with.

An example of a gazebo from a profile covered with corrugated board

To make a gazebo out of metal, it is enough to be able to use welding equipment.

Before starting construction work, it is necessary to complete a drawing of the future structure and buy building materials:

• Polycarbonate sheets;
• Profile pipes with a square section.

It is advisable to determine in advance the design of the structure and the amount of starting materials. Profile pipes in construction have managed to prove themselves on the positive side. Products are produced by manufacturers in two forms - with a square section and rectangular.

A variant of a country gazebo made of square pipes

You will also need to purchase tools:

• apparatus for welding;
• electric drill;
• grinder;
• hacksaw.

In addition, you need to buy a primer or paint coating for metal, which has an anti-corrosion effect. By providing reliable protection against corrosion, you can count on the durability of the building.

Why is aluminum popular in the construction of a gazebo from a profile

To make a beautiful gazebo, today the owners of country cottages often choose an aluminum profile. Its price is higher than that of a tree, but it has many attractive advantages:

• A versatile alloy that allows you to implement any design ideas;
• The ability to perform any decoration when finishing;
• Production of a collapsible design of the gazebo;
• Resistance to corrosion.

Today, aluminum profile gazebos are considered fashionable and stylish.

The construction of a glazed gazebo made of aluminum profile

They compete with metal products. Aluminum pipes can be used for the construction of structures of various forms:

• square;
• rectangular;
• hexagonal;
• octagonal.

The material serves to bring the most unusual fantasies to life. If you have an original idea, but you do not know how to implement it, contact a construction company for help. Professional designers quickly, according to which you can easily create the gazebo of your dreams on your own.

Step-by-step instructions for building a gazebo from a profile

After you have made a drawing, you need to choose a place to install the building. Basically, the owner wants to hide a small building away from curious passers-by. Therefore, the gazebo is behind the house. Often, climbing flowers are planted around the building, which serve as an attractive decor all summer.

A design option for a gazebo from a profile

At the same time, creepers and other plants do not allow onlookers to peep what is happening inside the gazebo. If there are large trees on the plot of land, then the building can be placed near them: in the midday heat, their foliage will save from the scorching sun. The general design of the future gazebo consists of racks that are connected by jumpers. The minimum number of supports is four.

For the manufacture of individual parts, a profile with the same or different section is taken. Protection from the sun is provided by a roof over the frame of the structure.

The number of slopes corresponds to the number of racks. The rafters are attached on one side to the uprights, and on the other, they are connected together.

The process of installing a strip foundation for a gazebo

To build it, follow these steps:

1. It is necessary to remove a layer of soil 20 or 30 cm thick from above.
2. The bottom of the structure is leveled and compacted.
3. Sand is poured into the trench to make a sand cushion.
4. Install the frame from the reinforcement.
5. Perform pouring from a solution of cement with gravel.

When building a gazebo on unstable ground, it will be required. Regardless of the type of foundation used, metal parts are laid in it during concreting. The frame of the gazebo will be attached to them. Embedded elements make the structure more durable and reliable.

An aluminum or metal profile, after fixing, will serve as an excellent basis for the design. The owner of the cottage must choose a powerful foundation if he plans to build a structure with large dimensions.

Ready-made brick foundation for a gazebo from a profile

Assembling the base of the gazebo from the profile

The structure of structures is easier to assemble when there are ready-made drawings. It is necessary to properly design the foundation so that the structure is solid:

The ties look beautiful in the center from the base. Where the entrance is, the structural element is recommended to be welded at a height that exceeds the height of the average person.

Roof for a gazebo from a profile

If you have chosen aluminum for the construction of the structure, then the roofing material should be lightweight.

Roof construction for a gazebo made of corrugated board

Polycarbonate sheets are great for roof construction. The building material transmits sunlight. By choosing bright colors, you can cheer yourself up in any weather. However, completely transparent sheets should not be taken, otherwise the sun will blind you. It is better to give preference to multi-colored building materials.
Reasons why a polycarbonate roof should be preferred:

• Affordable price makes the material attractive to everyone who appreciates practical solutions;
• Polycarbonate goes well with various building materials, including the profile;
• The ability to build a roof of any shape.

Benefits of polycarbonate

The building material has the following performance properties:

• UV resistant;
• incombustibility;
• Good strength;
• Durability;
• Possibility to make fantastic designs.

The best option for roofing polycarbonate is a structured (honeycomb) material. It has low weight and high flexibility. Any unusual design is easy to build. Pergolas made of aluminum profile can have a roof in the form of:

• domes;
• pyramids;
• arches.

The number of slopes may vary. can be installed in just one day.

Recommendations for the construction of a gazebo made of polycarbonate and profile

After installing the rafters, you can begin to fix the roofing material. It is important to take advice from professionals in your work: